PLA 3D Filament Volcano PLA 1.75mm 750 gram Black
-
24 Hours Dispatch | 12 Months Warranty
PLA 3D Filament Volcano PLA 1.75mm 750 gram Black
Unique features
- High heat resistance of ≥ 95° C after annealing
- Less than 0.3% shrinkage after annealing
- Roughly 8 times less shrinkage compared to competitor materials available on the market
- Engineered to have excellent dimensional accuracy before and after annealing
- Engineered for high printing speeds of > 120mm/s
- Highly crystalline immediately after extruding resulting in increased stiffness and temperature resistance
- Superb mechanical properties comparable to ABS
- Excellent interlayer adhesion
- Biodegradable
- Matte surface finish
General printing guidelines *
Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.06mm | Flow rate: ± 95 - 110% |
Print temp: ± 230 - 265° C * | Print speed: High | Retraction: Yes ± 5mm |
Heat bed: ± 0 - 60° C * | Fan speed: 50-100% | Experience level: Beginner |
- Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
- Flow rate depends on printing speed and type of hotend used. For full metal hotends a lower flow rate is recommended and for high printing speeds a high(er) flow rate is recommended.
Annealing Volcano PLA
Annealing is a secondary process in which a plastic part is heated up to half of the melt temperature for a moderate period of time before letting the plastic part cool back down to room temperature. When the plastic part is reheated (annealed) like this, the material relaxes and internal stresses and/or strains are relieved resulting in improved dimensional stability, reduction/removal of dimensional distortion and defects, and improved physical and thermal properties of the printed (and annealed) plastic object.
Step 1
Preheating the oven to 110° C is extremely important as your Volcano PLA printed object will then crystalize in such a rapid timeframe that there is almost no time for the material to shrink. This results in a negligible shrinkage percentage of < 0.3% and by that Volcano PLA is unsurpassed when it comes to reduction of shrinkage after annealing.
Step 2
When the oven is preheated to a stable temperature of 110° C then quickly put your Volcano PLA printed object in the oven. Make sure to do this as quick as possible in order to keep the loss of heat reduced to a minimum. Don’t remove any supports (if used) from the printed object when putting it in the oven.
It is recommended to place the Volcano PLA printed object on a flat aluminium sheet/foil or similar flat metal object to obtain a stable/equal heat transmission.
Small objects – 20 minutes timer
For small objects with thin walls and medium infill annealing will take ± 20 minutes
Large objects – 60 minutes timer
For large objects with thick walls and medium/high infill annealing take ± 60 minutes
Step 3
When the object is annealed taking above mentioned duration into account then switch off the oven and let it cool down to room temperature. Do not remove the object before the oven has completely cooled down to room temperature!
Step 4
When the oven is cooled down completely you remove the object from the oven and remove any support material (if used). Your Volcano PLA printed object is now annealed and has all thermal and mechanical properties as displayed in the Technical Data Sheet (TDS).
Shopping Planet dispatches your purchased items within 24 working hours after the payment is received. You will receive an email confirmation of your order including a tracking number, as soon as your goods are dispatched. We pride ourselves on providing you with the best value product and outstanding service.
Our warehouse is based in Melbourne but unfortunately not accessible to the public and pick up. However we offer free shipping on the majority of our items to almost anywhere in Australia. We are working with Allied Express, Australia Post, Fastway, Hunter Express and Toll to provide the most efficient delivery and service.
The estimated delivery time frames are:
For customers in VIC, approximately 2-4 working days.
For customers in NSW, SA, ACT, QLD approximately 2-4 working days.
For customers in NT, WA and TAS, approximately 2-4 working days.
We cannot ship to post offices, PO boxes, locked bags, parcel lockers or parcel collect locations.
Q: I received a faulty or damaged item, help!!
A: Please contact us within 10 working days in the unlikely event that the item arrives damaged or faulty. In addition to a detailed description, please provide images (or a short video clip if more appropriate) of the damage in order to proceed with the warranty process. Once assessed and approved by our customer service team, you will be contacted to proceed with the return, refund or replacement process. Please do not attempt to return the item without our approval.
Q:What warranty do you provide?
A: Non electronic products offer a 12 month warranty unless stated otherwise. Electronic products offer a 3 month warranty unless stated otherwise. If your product becomes faulty after receiving it and is within the warranty period, please contact us for assistance.
Q:Do I need to pay for return postage if my item is faulty?
A:Customers will not be required to pay for return postage if an item is faulty. If the item is required to be returned, we will arrange a return postage label at our expense.
Q: I’ve changed my mind, I don’t want the order any more.
A:Change of mind orders are accepted only under certain conditions. You must contact us within 10 business days of receiving your order, and the order must be unused and in the original packaging. Please provide photos to demonstrate this is still the case.
Q:What fees are associated with change of mind orders?
A: A 20% change of mind fee applies. A refund minus 20% of the purchase price will be provided once the order is received back into the warehouse.
Q:Do I need to pay for return postage if I change my mind?
A: Customers are responsible for return postage back to the warehouse. If we provide a return postage label, in addition to the 20% change of mind fee, the return postage will also be deducted.